ECM ROCKET GIOTTO ELEMENT REPLACE

These older Giotto Machines, MADE BY ECM come into the workshop frequently with failed elements. The old style element, pictured below is difficult to obtain, so I now stock a replacement.

Old and New – Replacement 1350W Element for ECM Giotto

Remove the old Element and clean up the thread.

Take the opportunity to remove 10 years of scale from the boiler.
Don’t forget to replace the seal.
Screw in the new element.

Element Installed. Replace the wiring and hot water pipe.
Check for and remove scale before replacing the pipe.

That’s all there is to it. Remove the element, clean things up and replace. clean the water level probe while you are at it. The controller will fill the steam boiler before it energizes the new element, so no chance of cooking the new element.

Get a Rocket Service Kit and other Rocket Parts here…

Comments are closed.

%d bloggers like this: